The patch bay cables are not necessary to get the Booth audio (microphone) to connect to the computer. We call this "Easy Mode."
- When there are NO PATCH CABLES plugged in, the patch bay is automatically routed from "Booth out" to "Apollo in"
- Using the Console (the digital mixing board on the desktop computer), switch from Line to Mic by clicking on "line/mic"
- Click "48v" on the Console to activate phantom power IF YOU'RE USING THE CONDENSOR MIC
- Round knob at the top is the preamp Gain, turn it up to the desired level
- output is still the slider in the main body
- Click the box that reads, "UNISON +"
- add the desired preamp from the list under "CHANNEL STRIP & PREAMP"
- these emulations replace the physical preamps to the right that you have been using (Warm Audio, Universal Audio)
- they are emulations of the REAL DEAL
- add the desired preamp from the list under "CHANNEL STRIP & PREAMP"
- BAM, just the same but all digital and NO cables :)